Kingspan File transfer (18): Exploded DA type tie wires are now flagged in the error log.ĬMF Standard horizontal cladding support (31): The location of intermediate wires has been fixed to the sheeting face. UltraZED Cold rolled sleeved (107): The Orientation hole option has been added on the Parameters tab. The option to select bolt size has been removed.ĬMF Diagonal ties (55): Diagonal wires now place 18 mm diameter fixing holes. Steadmans Non-std anti-sag (57), Steadmans Anti-sag system (53): The hole modeling error when using the anti-sag ties has now been fixed.ĬMF Cold rolled sleeved (120): The default bolt size is now 18 mm. Tube gusset (20): Previously, the Finish property was not correctly applied on the gusset plate when the gusset plate was created through the main part. This issue has now been fixed.Ĭolumn - 2 beams (14): Previously, when the secondary parts were sloped, the component could cause errors in the main part creation. Joist to column, type 2 (163): Previously, a bearing plate was created only for seats with an angle profile type. New G grade sections have been added at the end of the list. Metsec Standard riveted channel rails (37): The RCR Profile type list has been updated. This issue has now been fixed and UDA is empty. Haunch (40): Previously, when the Extra length for haunch flange plate option on the Parameters tab was left empty, 0.0 was written to the Shorten user-defined attribute. Metsec Side rail supports (28): Assembly prefix and position number have been added for the tie wires. Tapered I-beam (81): Previously, the beam was incorrectly cut at the start and at the end. Wall layout: Previously, in some cases, cuts were not created correctly when the contour of the wall layout was changed. Rectangular column reinforcement (83): Intermediate links were sometimes created with wrong end condition attributes (angle/radius/length). Floor layout: Polygon cuts now get the names from the cut parts.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |